Latest steel roll Tenders | Government steel roll Tenders

State Government

CTN :43467490

13 Jan, 2026 NA

Delhi - Delhi

Tender For s/i/t/c of e/m equipments and allied works for newly re-bored tube well at okhla vihar near majar in okhla constituency ac-54. - supply of submersible pump set fitted with dynamically balanced ss impeller mounted on stainless steel shaft with protection sleeve having stage bowl & closed grained shorted type impeller, the pump will be directly coupled to required wet type induction motor of 7.5 hp, 15 stage, speed 2900 rpm suitable for operation of 3 phase, 415 volt, 50 hz, ac supply with efficiency 70% at following duty point: 200-125-75 lpm on 89-124-133 mtr. head.having discharge outlet 50 mm and outside dia 142 mm.make: bs/skope/ any djb approved. , supply of hut type electrical feeder pillar / fabricated with 50 x 50 x 6mm angle iron and 16 swg ms sheet with horizontal and vertical intermediate member of suitable size. i.e. 1370 mm x 760mm x 460 mm. with arrangement for mounting of switchgear and electrical energy meter i.c. painting heaving following item fitted. a) mccb 63 amp, 4pole, 415volt, 35 ka -1 no. b) rccb 63 amp, 4pole with earth fault indication protecting a circuit automatically in the event of earth leakage sensitivity 100ma, - 1 no c) fully automatic star delta starter of relay range 13-21 amp. (7.5 hp to 10 hp) 3 phase oil immersed type -1 no.d) ampere 96 x 96 mm. square shape 0-30 amp-1 no. e) voltmeter 96 x 96 mm. square shape 0-500 volt-1 no.e) indicating lamp (a set of 3 lamps) 1.setf) shunt capacitor of 10 kvar mpp type with three phase isolator with suitable banking g) motor protection assembly with earth leakage protection phase sequence corrector, single phasing, protection, overload protection, high voltage / low voltage protection time delay power on, programmable time switch i.c. r&b phase facility to change over from automatic, to manual &vice verse for up to 10 h.p -01 nos.complete wiring &installation of above accessories with required copper conductor wire and thimble etc. 01 job.make of all components: any djb approved., s/o pvc insulated and pvc sheathed cable with plain copper conductor having 3 phases, 3 core flat for submersible motor of 4 square mm size each 100 mtrs. make:grandlay / havells./any djb approved make, s/o m.s. clamp of 600 mm length duly fabricated out of 12.5 mm thick 75 mm wide, m.s. plate for holding the pipe of 50 mm dia., s/o double flange gi column pipe 50 mm dia medium class each of 3 mtrs long duly threaded on both ends, welded fitted with gi flange on both ends with slot of submersible cable. make: tata/ jindal./any djb approved make, s/o/ tail piece of the medium class gi pipe 500 mm long with one end threaded as per outlet of pump & another end flanged as per size of gi pipe 50 mm dia., s/o gi 90 bend of size 50 mm dia having both side flange (heavy duty)., supply of ms nut bolts off size as per requirement., s/o rubber packing for 50 mm dia flange., fabrication and supply supply of bore cover approx size 1x1 made out from 6mm thick m.s. sheet in 2 halves and a circular hole in centre 3-1/2 dia. with locking arrangement by nuts and bolt. , earthing with g.i. earth pipe 4.5 meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required., providing and fixing 6 swg dia g.i. wire on surface or in recess for loop earthing as required., installation of t/well by lowering of sub p/set with all allied above items. this includes installation and grouting of panel boards with all electrical wiring & cabling at site. all tools & tackles i/c. tripod chain pulley blocks etc. shall be arranged by the firm. this includes testing & commissioning of t/well on load at site i/c. cartage, loading & unloading of material. it also includes a trial run of 30 hrs operation successfully by the firm. all required civil work included in the scope of work.

corporations/Associations/Others

CTN :43503171

29 Jan, 2026 NA

Bikaner - Rajasthan

Tender For providing of non paper printing services - area based - nameplates & signages; digital; aluminium grade 1100,non paper printing services - area based - nameplates & signages; digital; aluminium grade 1100,non paper printing services - area based - nameplates & signages; digital; stainless steel,non paper printing services - area based - nameplates & signages; digital; aluminium composite panel acp sheet,non paper printing services - area based - nameplates & signages; digital; aluminium composite panel acp sheet,non paper printing services - area based - nameplates & signages; digital; aluminium composite panel acp sheet,non paper printing services - area based - nameplates & signages; digital; aluminium composite panel acp sheet,non paper printing services - area based - nameplates & signages; digital; aluminium composite panel acp sheet,non paper printing services - area based - nameplates & signages; digital; aluminium composite panel acp sheet,non paper printing services - area based - nameplates & signages; digital;

CTN :43378679

13 Jan, 2026 NA

Indore - Madhya Pradesh

Tender For corrigendum : supply of fitting of fiber designer panel board , design and fixing of false ceiling , provn of base wall , provn of iron frame structure wall to cover area , installation of tiled flooring in lounge area , seating arrangement in lounge area , undergound and wall concealed electrical wiring , lllumination device with 12 watt luminous output , installation of serving counter , pillar of pipe for paneling , air circulatory with high speed efficiency , curved metal roof sheet , display shelfs of 8 mm glass , multi colour print on glass wall , name bd of lounge , designer texture painting on outside wall , stainless steel railing made of 2 pipe with support pillar , fixing of toughened glass wall 12 mm thickness on studs

CTN :43247204

15 Jan, 2026 NA

Mathura - Uttar Pradesh

Tender For corrigendum : supply of engine oil 15w40 , ignition key , bty 12v 150 ah , coolant , self starter 12v kirloskar , oil filter warmers cartridge 1 ltr , avr 63 kva , distilled water , fuel pipe 19mm stainless steel 2 mtr , fuel pipe 19mm stainless steel 1 mtr , self starter solenoid switch , bty 12v 130 ah , over flow pipe , fuel filter 1 ltr capacity , oil filter mahindra , hose pipe 2 inch 1 mtr , thormoteel wall , banjo washer 19mm , self starter 12 v mahindra , air filter , digial panel bd , turbo charger , radiator , securing strip , oil filter , fuel filter , fuel pipe 17mm 1 point 5 mtr , fuel pipe 19mm 1 mtr , avr , bty 12 v 130 ah , hand primer , air cleaner set , fan belt a 57 , fuel pipe , air cleaner , fuel pipe 1 mtr , fuel filter , charging alternator 12v , bty terminal , oil filter , nut bolt 17mm 2 inch with washer , nut bolt 13mm 2 inch with washer , self starter 12 eicher , bty lead 1 mtr red block , fuel pipe 19mm stainless steel 1 feet , digital panel bd , thimble 25mm , thimble 35mm , fan belt , bty 12v 100 ah , self starter 12v , bty lead 1 mtr red and black , oil filter warmer cartridge 0 point 5 ltr , bty 12v 100ah , bty lead red black , exhaust fan 350mm with motor , self-starter 12v kirloskar , fuel feed pump , avr 30 kva kirloskar , fuel filter kirloskar 0 point 5ltr , bty lead red and black , bty terminal , engine oil 10 w 30 , fuel pipe rubber , oil presure pipe , control panel , jack cylinder oil seal , manual jack , jack pin , brown paint , white cream , silver paint , roller 6 inch , turpintine oil , main door lock , revitment screw , fire cylinder hook , hydraluic oil , curtain road for door , bty 12 v 150 ah for invertor , pvc ruberised flooring mat , ppgi sheet 16 feet x 3 feet , puff panel , self drill screw 90mm , cable 2 point 5 sqmm , cable 1 point 5 sqmm , wall mounted fan , electric socket three phase havles , fire extingusher 1 kg , led 6 inch x 6 inch , led 2 feet x 2 feet , ppgi sheet , brown paint , white cream , og paint , ac gas and cooling coil , hydraulic oil , securing strap , main jack 5 ton , fire extingusher with hook 1 kg , securing sitrap , led 2 feet x2 feet , invertor 2 kva with bty

CTN :43486735

19 Jan, 2026 1.49 Lacs

Leh - Jammu And Kashmir

Tender For supply of steel roller track , adjustable foot level , tube fan and cable , electrical insulation mates , aluminum pipe with connector , plywood board 2mm with mate

CTN :43486969

19 Jan, 2026 1.49 Lacs

Leh - Jammu And Kashmir

Tender For supply of steel roller track , adjustable foot level , tube fan and cable , electrical insulation mates , aluminum pipe with connector , plywood board 2mm with mate

corporations/Associations/Others

CTN :43487189

17 Jan, 2026 NA

Hyderabad-T - Telangana

Tender For supply of fabrication and erection of isa, ismc, ismb or any other cross section of ms e250 grade a of is 2062-2011 , fabrication and erection of stainless steel sections including cutting, welding by gtaw process, drilling, handling, shifting of material as per working documentation and site requirement , erection of stands or local control panel or consoles or fabricated supports either by welding to eps or by anchoring wall or floor concrete or bolting to supports , manual welding on carbon steel and stainless steel equipment and components using gtaw process. , manual welding on carbon steel and stainless steel equipment and components using smaw process. this include similar and dissimilar welding of fillet joint configuration of various weld size. , erection and dismantling of scaffolding-erection of scaffolding using standard ms pipes cross support , core cutting of holes upto dia 200 mm of various depths in reinforced concrete walls or slabs , core cutting of holes above dia 200 mm of various depths in reinforced concrete walls or slabs , drilling of holes upto dia 200 mm of various depths in concrete block walls or brick , drilling of holes above dia 200 mm of various depths in concrete block walls or brick , items of dia upto 40 mm , items of dia above 40 mm upto 60 mm , field survey transferring and marking the grid location in x,y and z axis using total station in main plant building as and when required.

CTN :43487079

22 Jan, 2026 NA

Mumbai - Maharashtra

Tender For tender for supply of pore type filter , pore type filter , spring , spring , seal , o ring 13 60x2 70 20a8 gn , o ring 18 40x2 70 20a8 gn , o ring 24 60x3 60 20a8 gn , o ring 27 80x3 60 20a8 gn , o ring 34 10x3 60 20a8 gn , o ring 8 90x1 90 20a8 gn , o ring 10 50x2 70 20a8 gn , o ring 16 90x2 70 20a8 gn , hp air pressure reducer 250 45 bar curuch circuit , o ring2 60x1 9020a8 gn , o ring 21 30x3 60 20a8 gn , o ring 13 60x2 70 20a8 gn , o ring 29 30x3 60 20a8 gn for slide valve 18st000c0117 , o ring 6 40x1 90 20a8 gn , o ring 29 30x3 60 20a8 gn for non return valve 18cr000c0182 , o ring 24 60x3 60 20a8 gn , o ring34 10x3 6020a8 gn , lock tab washer nd8 stainless steel , rapid blowing vv hp air distribution panel dy hp air system

CTN :43402074

06 Jan, 2026 NA

Multi City - Chhattisgarh

Tender For corrigendum : engineering items ( non authorized dealer)-- , aira valve auto mation ce 1128 valve automation f/b- r/b full bore end type- s/e, size dn 25mm bore seat/stem htfe 98316 bore- 25mm flanged end both side., high flow pump size- 5 inch head- 40 mtr. with motor pump or base freme, s.s. ball valve flange type size- 25mm make- aira, rubber stator for high flow pump size- 4” x 4” model no. rbh4152aabn make- risanshi, rotary screen taflon roller assembly front assembly make- uttam, juice rotary screen, rotary screen taflon roller assembly rear assembly make- uttam, juice rotary screen, rotary screen taflon roller assembly front surface assembly make- uttam, juice rotary screen, ‘b’ mescuite pump spare roter with shaft and gen metel strips pump size- 8 x 8 inch make gita pump, valency welding rod bronzocar- 32 ac/dc size- 3.15mm, valency welding rod bronzocar- 32 ac/dc size- 4.00mm, sapre tyre for following size- f- 60, sapre tyre for following size- f- 70, sapre tyre for following size- f- 80, c.i. pin bush coupling complete assembly with pin bolt with rubber bush size- 10”, c.i. pin bush coupling complete assembly with pin bolt with rubber bush size- 12”, rubber bush for pin bush coupling rubber bush size- id 19 x od 38mm x length- 40mm, en- 8 round bar size- 25mm x 4 mtr., en- 8 round bar size- 30mm x 4 mtr., en- 8 round bar size- 36mm x 4 mtr., en- 8 round bar size- 40mm x 4 mtr., coupling bolt med. en- 8 size bush bolt dia- 19mm bush length bolt- 45mm bolt caller 5mm thick- 2500, thread length- 21mm, 5/8” bsw thread with out thread- 20mm length dia- 5/8 inch, "uc-1500 type uttam make machine continuous machine spare pully housing complete assembly", "uc-1500 type uttam make machine continuous machine spare main housing assembly complete set", "uc-1500 type uttam make machine continuous machine sparebuffer chamber assembly", top scraper for mill no. 3, 4 pitch 35mm material- c.i. 1030 gr. (as per drawing) , "discharge scraper for mill no. 3, 4 pitch 35mm material- c.i. 1030 gr. (as per drawing)", b messacute pump complete 6" x 6" for b messacute without motor make risanshi, top gear transmission make model no. 2340 hbx ratio- 36, s.no. 18026797, top gear transmission make model no. 22300 hbx ratio- 37.85, s.no. 16123824, level tranmitter range - (-2150 to 0 mmh2o) supply - 10.5 to 45vdc, output - 4 to 20ma with installation & trail support warranty - 2 year make - abb/siemens/yokogawa, controller for spray enggineering panel make - winpac model no - wp - 8147 pwr - (10 to 30 vdc) with installation & trail warranty - 02 year, solenoid valve coil with hand regulator make - rotex model - mf42 - 3012x3 - 62g (3/2 way) supply - 230vac, esp level switch probe with controller and cables material - stainless steel no of parts - 4 ports, meadia type - dry material working pressure - 150°c make - eip enviro level control pvt. limited with installation & trail warranty 02 year, mix bad (mb) conductivity sensor cable with its controller work on low cell constant make- ion exchange model - indian con 5000w with installation support warranty 02 year, ph sensor cable with controller make - ion exchange model no - indion 4000 phw with installation & trail supports warranty - 02 year, touch hmi programmed display make - formaplastic model - weintexmt 5017 input power supply 24 vdc warranty - 02 year, power supply transformer make - kasunga model - dvsc 200 aem4it ( ac415/110 . 100v 200va), load cell make - minibea model - cbe1 - 50k warranty 02 year, programmed plc for batch type machine make - mitsubishi electric r5485 & lan card suported model no - fx5u-64m, programmed by formaplastic warranty - 02 year installation service support & trail work, 24 volt dc coil for solenoid valve ip - 65 make - techno as per sample provided, coil for solenoid valve supply - i-230vacol make - rotex as per sample, temprerature controller make - electronic system & devices model - esd9223 warranty - 02 year, plastic chair - ni

CTN :43452330

26 Jan, 2026 NA

Jalpaiguri - West Bengal

Tender For supply of 12 x 150 mm , tiger bolt 50 mm dia , anchor pin made of 15 mm dia and 450 mm long , stair with 4 steps and 2 side support angle , stainless steel rivet fasteners , sd screw 75 mm long , puff insulation pannel of 40 mm thick both side pgi sheet 2520 mmx908mm , puff insulation pannel of 40mm thick both side pgi sheet 1375mmx 908mm , puff insulation pannel of 40mm thick both side pgi sheet 395 mmx 908 mm , puff insulation pannel of 40 mm thick both side pgi sheet 2855 mm x 1048 mm , puff insulation pannel of 40 mm thick both side pgi sheet 3145 mm x 1048 mm , puff insulation pannel of 30 mm thick both side pgi sheet 3100mmx1000mm , roof ridge 2440mmx 600mm x 0. 63mm , texture finished gypsum board false ceiling panel of size 600mm x 600mm x 9mm , gi binding wire annealed not less than 0. 3mm dia bending wire. , cable pvc insulated aluminium conductor 10 sqmm 2 core , xlpe insulated pvc seathed 16 sqmm 2 core , exhaust fan , plastic body wall mounting fan 450mm sweep. , pvc box 8 x 6 inch , angle holder anchor , pvc copper cable 1. 5 sqmm single core , pvc frls copper cable pvc 2. 5 sqmm , a system of portable silent inverter alternative quiet , switch socket combination mutipurpose 5 amp 5 pin , modular type 5amp 3 pin electical top multi plug. , switch piano type 5 amp isi marked. , pvc casing caping , ceiling rose 2 to 3 terminal. , pvc electrical wire cover flexible pipe 17mm dia long. , pvc elbow , internal external elbow , full thread screw , pvc tee , motion sensor light , t light , tape insulation 10 mtr. , dp mcb 40a , single mcb 10a , single mcb 6a , double leaf steel lockers. , fire extinguisher , waste bin 120 ltr , water dispenser 500watt with capactity of 3. 2ltr , looking mirror 1200x750x3. 5mm thick , heating device , rubber hand gloves superior quality , measuring fibre glass tape 5 mtr long. , nylone rope , four leg aluminium ladder 8 feet long , industrial safety helmet , brick hammer , drill bit 6mm dia , drill bit 8mm dia , drill bit 10mm dia , cordless pistol grip drill , 500 watt 13mm variable speed reversible hammer drill machine , angle grinder , nail gun , tile cutter , electric riveting machine , manual rivet gun , jigsaw machine , allen key set foldable type , hacksaw frame with 2 blade , neon tester , screw driver 12 inch , tape measuring metallic 30m , cutting plier insulate , pipe wrench , spanner adjustable , bottom frame of size 2500mm x 1300mm , ms chequred plate size 2460mmx1260mmx5mm. , bottom frame of size 2500mmx1300mm rhs 80mmx40mmx3. 2mm , corner main column of ms rhs 80mm x 40mm x 3. 2mm x 2750mm , partation column of ms rhs 80mm x 40mm x 3. 2mm x 2035mm , ladder size 1000 x 600 mm. frame of ms rhs 80 x 40 x 3. 2mm , fixed hold fast with hole for nut bolt of ms shs 25 x 25 x 3. 2mm 100mm , fixed c channel to secure the 50mm puff pannel of islc 40 x 75mm , column base of ms checkered plate size 300mm x 300mm x 5mm with 8 nos holes , door post column of ms rhs 80 x 40 x 3. 2mm x 2035 , truss made of ms shs 25 x 25 x 2. 6mm 1480mm x 440mm , purlins made of ms shs 25 x 25 x 2. 6mm 2718mm. , door shutter of 50mm puff panel size 590mm x 2035mm. , side of 50mm puff panel size 1140mm x 2035mm. , partation middle pannel of 50mm puff panel size 1140mm x 2035mm. , top panel of 50mm puff panel size 1195mm x 1185mm. , back panel of 50mm puff panel size 1190mm x 2035mm. , front middle panel of 50mm puff panel size 560mm x 2035mm. , water tank top frame size 1000 x 1000 with ms isa 40 x 40 x 6 mm , water tank side frame height 1830mm with ms isa 40 x 40 x 6 mm , water //bid details2 / 107tank bracings of size 1290 mm x 4 nos , prepainted galvalume aluminum zinc coating gi based 900mm long x 1050mm width. , pre painted galvalume aluminum zinc coating gi based 3040mm long x 600mm width. , nut bolts with double washers 0mm dia x 75mm long , nut bolts with double washers 7mm dia x 100mm long , nut bolts 6mm dia , full thread screw 2mm dia x 10mm long , j hook , pvc pipe 110 mm , pvc tee 110 mm , pvc

Steel Roll Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

corporations/Associations/Others

corporations/Associations/Others